Gold Mining Process Development
GRAVITY CONCENTRATION
Gravity concentration processes rely on the principal that gold contained within an ore body is higher in specific gravity than the host rocks that contain the gold. Elemental gold has a specific gravity of 19.3, and typical ore has a specific gravity of about 2.6. All gravity concentration devices create movement between the gold and host rock particles in a manner to separate
the heavy pieces from the lighter pieces of material.
The prospector’s gold pan is the most familiar gravity concentration device. To function properly, the ore must be broken down to particles small enough to provide a significant specific gravity difference among the particles.
Placer mining has generally been where gravity concentrates have been most widely applied. In a placer deposit, there has generally been a pre-concentration of gold made naturally by gravity concentration due to ore particles being transported by water. Mechanical concentration is used to continue the process until sufficient concentration is obtained.
Gravity concentration works when gold is in a free elemental state in particles large enough to allow mechanical concentration to occur.
The number of types of gravity concentration devised that have been used is almost limitless. Some of the more popular ones are:
1. Sluice boxes
2. Rocker boxes
3. Jigs
4. Spirals
6. Centrifugal concentrators
7. Dry washers
In addition to specific gravity differences, the performance of gravity concentration is also affected by particle shape, as can be imagined by comparing a falling leaf to a twig falling in air.
The performance of the various categories of gravity separators are as generally depicted on the following illustration.
The process flowsheet generally consists of conditioning and sizing of the feed material followed by ore or two stages of recovery.
